Teltonika RUT901 4G Wi-Fi Router

Teltonika

Κωδικός προϊόντος: 1053142

Εγγύηση	2 χρόνια εγγύηση προμηθευτή

Η συσκευή εξασφαλίζει υψηλή απόδοση, παρέχοντας αυτόματη ανακατεύθυνση WAN σε μια διαθέσιμη εφεδρική σύνδεση, διασφαλίζοντας τη συνέχεια του δικτύου και εξαλείφοντας το χρόνο διακοπής της λειτουργίας.

Χρήστες Wi-Fi: έως 100 ταυτόχρονες συνδέσεις
Θύρες Ethernet: 4 θύρες x RJ45, 10/100 Mbps
Βαθμός προστασίας: IP 30
Ασύρματη λειτουργία: IEEE 802.11b/g/n
Λειτουργικό σύστημα: RutOS (λειτουργικό Linux με βάση το OpenWrt)

179.80€

Διαθεσιμότητα

Κατόπιν παραγγελίας

Εξαντλημένο

Σύγκριση

Χρόνος Παράδοσης

Εφόσον το προϊόν είναι άμεσα διαθέσιμο ο σύνηθες χρόνος παράδοσης είναι 1 έως 3 εργάσιμες ημέρες.

Ελάχιστος Κόστος: 3,50€ έως 3 κιλά (Kg)
Για κάθε επιπλέον κιλό (Kg): +1,00€
Κόστος Αντικαταβολής: 2,50€

Όλες οι παραγγελίες που έχουν ολοκληρωθεί έως τη 13:00 αποστέλλονται την ίδια ημέρα

Τρόποι Πληρωμής

Αντικαταβολή με κόστος 2,50€
Έως 4 άτοκες δόσεις
Χρεωστική ή Πιστωτική κάρτα
Τραπεζική Μεταφορά
Πληρωμή με RF
Δόσεις με χρεωστική μέσω TBI Bank

Datasheet

Περιγραφή

Teltonika RUT901 4G Wi-Fi Router

INDUSTRIAL CELLULAR ROUTER

The RUT901 cellular router delivers the top-rated features of its predecessors, the RUT950 and RUT951, to the market. The device ensures high-performance, providing automatic WAN failover to an available backup connection, guaranteeing network continuity and eliminating downtime.

FEATURES

MOBILE

Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list: Operator black/white list
Multiple PDN: Possibility to use different PDNs for multiple network access and services
Band management: Band lock, Used band status display
APN: Auto APN
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: Router assigns its mobile WAN IP address to another device on LAN

WIRELESS

Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi security: WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE, OWE; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID/ESSID: SSID stealth mode and access control based on MAC address
WiFi users: Up to 100 simultaneous connections
Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

ETHERNET

WAN: 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN: 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forward, traffic rules, custom rules
DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd

SECURITY

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag based VLAN separation
Mobile quota control: Custom data limits for both SIM cards

VPN

OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN: Method of building scalable IPsec VPNs
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: WireGuard VPN client and server support

MONITORING & MANAGEMENT

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
RMS: Teltonika Remote Management System (RMS)

POWER

Connector: 4-pin industrial DC power socket
Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
Power consumption: < 2 W idle, < 7 W Max

PHYSICAL SPECIFICATION

Casing material: Aluminium housing, plastic panels
Dimensions (W x H x D): 110 x 50 x 100 mm
Weight: 297 g
Mounting options: DIN rail (can be mounted on two sides), flat surface placement